Ionicore Inline Filter Coconut Granular Activated Carbon 1/4 – 2.5″x11″ COD: CL-330126

Ionicore IC-11CGAC Coconut Granular Activated Carbon Inline Filter 1/4″ NPT 2.5″x11″

Filter composed of granular activated carbon derived from coconut shells for a high efficiency absorption level.
Reduction of chlorine, odor, color, taste, dirt, rust, suspended matter not visible to the naked eye, mold, algae. Ideal for water coolers and post osmosis.
They were designed to be placed inside machinery.

• Improves the taste of drinks.
• Protects against blockages, corrosion and wear.
• Does not require electricity.
• Horizontal or vertical installation.
• The filter is easy to install and replace without the use of special tools.

INLINE cartridges do not require heads or bayonet fittings for their installation and can be positioned in any position (horizontal or vertical).

Characteristics:
• Chlorine reduction

• Technology: Acid-washed granular coconut activated carbon (GAC).
• Filter density: none
• Autonomy: see table
– Autonomy varies according to:
• the quality of the incoming water
• of the required capacity
• of the incoming water pressure
• filter use (continuous or intermittent)
• Cartridge dimensions DxH (mm.): 62.2×280(mm.) – 2.5”x11″(In.)
• Activation: it is advisable to let the water flow through the filter at maximum pressure and with maximum flow rate, for at least 5 minutes to allow the air present in the cartridge to be purged.
• Cartridge change: When capacity is reached, or when flow is too slow (falls below 0.7bar/10psi), every 6 months.