Digiflow 6000 LCD flow meter monitoring liters COD:CL-330228

The flow meter can total 99,999 litres and monitor up to 5 different filters simultaneously.
• input – output: 3/8” MNPT
The LCD display signals by flashing and with an acoustic alarm when the limit of the various filter work insertion capacities is reached. Battery operation with 2 ministilo (2 AAA) alkaline batteries with a duration of one year.
When the batteries run out, the last processed data will be automatically stored inside the instrument.

DIGIFLOW 6000 INSTRUCTIONS FOR USE
Battery Installation
Slide off the battery compartment cover and insert 2 AAA batteries. Close the cover.

Set the capacity for each filter
Press and hold DISPLAY for 4-5 seconds. Then press RESET and release both buttons. The DigiFlow 6000R will enter the filter capacity registration procedure. The right digit will show a “1” flashing twice (indicates the filter number) and the capacity.

Now press DISPLAY to choose the capacity of filter no. 1. The sequence is 100-200-300….9800-19900-OFF-0-100 (model with measurement in Gallons) or 500-1000…..99500-OFF-500 (model with measurement in Liters).
By holding DISPLAY you can speed up the selection sequence. After choosing the correct capacity. press RESET to save the setting. The procedure will move to the configuration of filter no. 2. The second digit from the right will indicate a “2” flashing twice and the capacity entered for filter no. 1. Repeat the same procedure as previously performed to configure up to 5 filters. The setting procedure will end. returning to the original state. if there is no input for 10 seconds.

Operations
The DigiFlow 6000R will automatically turn on when there is any water passing through. It will automatically turn off after 10 seconds if there is no water passing through.

Press DISPLAY to view the volume of water passed. Press DISPLAY again to view the remaining capacity of each filter. On the DigiFlow 6000R the filter number will flash 2 times and then show the remaining capacity for a total of 5 filters.

Low capacity alarm
When each filter reaches 0 capacity, the Digiflow will produce an audible alarm to alert the user to change the cartridges. Press RESET to turn off the alarm and reset the filter capacity.

Low battery alarm
When the battery power is lower than the normal working level, a buzzer will beep twice to remind you to change the batteries. The information will be retained in memory if the battery is completely discharged or removed.

Reset
Press and hold RESET for 8 seconds to reset the meter.