Profine Sanitization Cartridge COD:CL-R001071

Normally the processing times for this product are 24/working hours from the order.
For orders of multiple units, contact us to ensure actual availability.

Empty Profine quick-connect cartridge that can be opened for sanitization

Filter for sanitization of drinking water treatment equipment

Installation and use

Bayonet connection for PRO:fine Thinkwater heads and similar.

Installation only vertically.

Before removing the filter cartridge installed in the system, close the water inlet and eliminate the pressure in the circuit by opening the downstream tap.

Rotate the used cartridge 90° clockwise, then remove the cartridge from the head.

Open the dip tube and fill the empty cartridge with the desired sanitizer; then reinsert the dip tube.

Insert the sanitizing cartridge and rotate it 90° counterclockwise.

Open the inlet valve and supply water to allow the sanitizer to flow for at least 30 seconds.

Close the water inlet valve and wait at least 20 minutes (depending on the sanitizer used).

Rinse thoroughly until all sanitizer residue has drained away, then install the new filter cartridge into the system.