Slim 7 lt. Resin Cabinet Water Softener, for 1 Person COD: CD-1500010637X

COMPLETE READY-TO-USE KIT

7 Liters Resin Slim Version

Remove Limescale from Water Forever!

Ideal for 1 Person

Electronic programmer that allows you to put the device into operation quickly and easily. New generation water softeners with volumetric valve. The system consists of a PRFV cylinder and a polyethylene body. 959D valve with delayed regeneration and a mixer valve to regulate the output hardness. By-pass for installation included. Four different regenerations: Timed chronometric - after the programmed number of days has elapsed, Immediate volumetric - when a certain amount of water has passed, delayed volumetric - from the volume of water and the programmed time, mixed volumetric - similar to the delayed regeneration, but allows you to program a safety regeneration after the programmed number of days have elapsed. CE, NSF, DM 25, DM 174 certified product.

Characteristics
* Min. pressure: 2.5 bar(2.5 kg/cm2)
* Max. pressure: 8 bar(8 kg/cm2)
* Minimum temperature: 4°C
* Max temperature: 35°C
* Water inlet/outlet 1" M. (30lt.), 3/4" M. (slim 7, slim 12, 12.5, slim 18, 18lt.)

Water hardness (limestone)
Expressed in °F (French degrees), it can be measured with drops of Titrant, important for determining the choice of the type of softener and optimizing salt consumption.

Exchange capacity
Hardness that the softener is able to retain.
slim 7 Liters resin: 22ºHFxm3 * slim 12 Liters resin: 49ºHFxm3 * 12.5 Liters resin: 49ºHFxm3 * slim 18 Liters resin: 97ºHFxm3 * 18 Liters resin: 97ºHFxm3 * 30 Liters resin: 170ºHFxm3.

Calculation example to determine the correct article
A 30 litre resin water softener with a hardness of 40°F (medium-high hardness) develops 4,250 litres of softened water (170:40=4,250). In this case, it is necessary to program 4,250m3 in the treatment capacity of the water softener via the buttons on the display and the softener supplies limescale-free water at zero French degrees.

Adjusting the output hardness
It is not recommended to supply fully softened water in domestic installations. These softeners have a built-in residual hardness regulator that allows you to precisely adjust the hardness of the treated water. To adjust the residual hardness, you need to gently open the MIX valve regulator. All softeners are supplied with this valve completely closed and will therefore supply water at 0°F. For water intended for human consumption, a residual hardness of between 5 and 10ºF is recommended for copper pipes and between 8 and 10ºF for iron pipes. Depending on the programmed output hardness, the softener will tend to produce more softened water and less salt consumption because the input hardness must be compensated for by the output value. A 30-litre resin softener with an input hardness of 40°F and 5°F of output hardness, develops 4,857 litres of softened water (170:35=4,857). In this case, you need to program 4.9m3 in the treatment capacity of the softener using the buttons on the display. On average, a person consumes 150 liters of water per day and a timed regeneration is recommended every 4/5 days, so a family of 4 people with water at 40°F consumes 3,000 liters for 5 days, so a 30-liter softener with a regeneration programmed even every 6 days can be installed.

Benefits and advantages
Reduction of water hardness, which causes scale. ENERGY SAVING: the device prevents scale from forming in pipes and ducts. Greater sense of well-being during the shower. Soft and clean skin. Increased lifespan of household appliances and boilers. ECONOMIC SAVING: reduction in the use of soaps, softeners and chemicals. Reduced maintenance costs. Fully automatic operation. You only need to worry about adding salt to the softener.

Increased sodium (For drinking water)
Most of the sodium consumed is taken in with food, especially those obtained through industrial processing. Salt is an excellent preservative and therefore is used as an additive for processed products. The sodium intake with the water we drink is relatively low compared to that which is taken in with food. All softeners to produce softened water through ion exchange in resins, produce sodium ions in the softened water output. The recommended sodium limit for water intended for human consumption is 200 ppm liter. Depending on the sodium concentration and the hardness of the water, it is possible that the water has a higher sodium concentration than recommended. In cases where this occurs or if it is necessary to follow a low-salt diet, it is advisable to install a domestic reverse osmosis device for drinking water.

Slim model specifications 7lt. resin. (suitable for one person)
* Salt consumption for regeneration: 0.60 Kg./salt.
* Water consumption for regeneration: 30lt.
* Quantity of water treated for regeneration, 35°F-0.628m3, 40°F-0.550m3, 45°F-0.488m3, 50°F-0.440m3, 60°F-0.366m3.
* Working flow rate 0.30m3/h
* Max. flow rate 0.40m3/h
* Dimensions mm (LxDxH) 230 x 475 x 550