Techno AS 350 Filter COD: CL-070

For orders of multiple units, contact us to ensure actual availability.

• Filter for the removal of Arsenic III and V Refiner RS ​​Techno AS 250
• Filtration capacity: 5 microns
• Compatible with everpure filter head

Filter Features

• • chemical action, ion exchange carried out by anionic resins loaded with iron hydroxide and characterised by exceptional selectivity for the removal of Arsenic III and V.
• • adsorption action and mechanical filtration action carried out by the Carbon Block with a filtration degree of 5 microns;

Installation and use
Bayonet connection for Refiner, Everpure QL2B and similar heads.

Vertical or horizontal installation with the aid of cartridge support clips.

1) Before removing the filter, close the water inlet and eliminate the pressure in the circuit by opening the downstream tap.

2) Rotate the used filter 90° clockwise, then remove the cartridge from the head.

3) Insert the new filter, after removing the protective cap, and rotate it 90° counterclockwise.

4) Open the inlet valve and dispense water to activate the new filter for at least 3 minutes.

After short periods of non-use, let the water flow before removing it for drinking.

If the system is not used for a long time, disinfect it.

Intended use

Composite structure filter (ministerial decree 25/2012, ex ministerial decree 443/990 art. 2 paragraph 8) for the treatment of drinking water in derogation with arsenic parameter.

Do not use where water is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.