RS Techno SI 250 filter COD:CL-R002250

For orders of multiple units, contact us to ensure actual availability.

• Demineralizing filter RS Techno SI 250
•  It acts as a filter system for the reduction of dissolved salts.
•  Thanks to the chemical action of ion exchange, carried out by particular mixed-bed resins, total demineralization of the water is guaranteed.
• Use exclusively for the treatment of water NOT intended for human consumption , but intended for laboratory use or particular industrial processes .
• Compatible with everpure filter head

Recommended use

• in order to demineralize;
• technological and industrial applications;
• heat pump systems;
• systems with technical boilers;
• ice accumulators.

Installation and use
Bayonet connection for Refiner, Everpure QL2B and similar heads.

Vertical or horizontal installation with the aid of cartridge support clips.

1) Before removing the filter, close the water inlet and eliminate the pressure in the circuit by opening the downstream tap.

2) Rotate the used filter 90° clockwise, then remove the cartridge from the head.

3) Insert the new filter, after removing the protective cap, and rotate it 90° counterclockwise.

4) Open the inlet valve and dispense water to activate the new filter for at least 3 minutes.

After short periods of non-use, let the water flow before removing it for drinking.

If the system is not used for a long time, disinfect it.

Intended use

Composite structure filter (ministerial decree 25/2012, ex ministerial decree 443/990 art. 2 paragraph 8) for the treatment of drinking water in derogation with arsenic parameter.

Do not use where water is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.