The Filter Oceano Precoat Medium uses high surface area membrane technology and powdered activated carbon.
- Filter Ocean Precoat Medium
- Filtration capacity: 0.5 micron
- Removes from water: suspended substances greater than 0.5 µm, chlorine and derivatives, organohalogen compounds, organic substances and metal compounds.
Installation and use
Vertical or horizontal installation with the aid of cartridge support clips.
1) Before removing the filter, close the water inlet and eliminate the pressure in the circuit by opening the downstream tap.
2) Rotate the used filter 90° clockwise, then remove the cartridge from the head.
3) Insert the new filter, after removing the protective cap, and rotate it 90° counterclockwise.
4) Open the inlet valve and dispense water to activate the new filter for at least 3 minutes.
After short periods of non-use, let water flow before withdrawing it for drinking. In case of prolonged non-use, disinfect the system.
Characteristics
– Capacity 11000 l
– Operating flow rate 6 l/min
– Temperature Min 2 Max. 39°C (39-86°F)
– Height 37.1 mm
– Diameter 8.8 mm
– Compliant with Ministerial Decree 25/2012.
Italian Certification of the Institute for Hygienic Quality of Food Technologies (Tifq)
