RO800 PLUS is a latest-generation reverse osmosis system, designed to offer the best performances while adapting to the characteristics and spaces of all kitchens. This system is able to produce up to 2 liters per minute of osmotized water thanks to its 800 GPD membrane.
Filter Replacement
Once the incoming water has been turned off and the system has been turned off, simply remove the filter cover, press the cartridge replacement button and the corresponding filter will release so it can be removed. Now you can insert the new filter into its seat until you hear a locking “click”, and hold down the reset button for 3 seconds to restore the life of the new filter.
Smart faucet
The LED on the tap shows you the quality of the water being dispensed and provides a reminder to replace the filters.
Technical specifications:
– Rated voltage/frequency: 100-240V. – 50/60 Hz
– Rated power: 75W.
– Inlet water pressure: 0.1-0.4 MPa (1-4 bar)
– Water flow rate at outlet: 2 lt./min.
– Operating temperature: 4-40 °C
– Dimensions (mm.): 425x130x252
Components included in the package:
1x Red PE tube 1/4″ (2mt.)
1x Blue PE hose 1/4″ (2mt.)
1x PE pipe 3/8″ (2mt.)
5x Cable Ties
1x Instruction Manual
1x Smart Faucet
1x Exhaust Clip
10x Clips 1/4″
5x Clips 3/8″
1x Transformer
1x 3-way ball valve
1x Elbow with shank Ø pipe – Ø shank 3/8″ x 3/8″
2x Elbow with shank Ø pipe – Ø shank 1/4″
1x Straight Intermediate Ø tube – Ø tube 1/4″ x 1/4″
1x Ionicore Inline Filter Remineralizer and PH Regulator (GAC) Coconut 1/4″ FPT 2″x10″.
Change filters every 6 months (or when capacity is reached).
Change membranes every 24 months (or when the fixed residue (TDS) does not decrease).
EXCLUDED: Tap (See "Mixers" section)
